You are here: Home > Other CNC Router Bits > Onsrud Cutters > Solid Surface Bits
Solid Surface bits for all your Solid Surface bit applications.
Sort By:
Page of 8
3/16" Super-O Flute Spiral Upcut 1/4" 2 Edge Spiral Upcut Ball Nose 1/8" 2 Edge Spiral Upcut Ball Nose
65-019 - 3/16" Super-O Flute Spiral Upcut
List Price: $50.90
USRT Price: $43.27
Save $7.63!
52-280B - 1/4" 2 Edge Spiral Upcut Ball Nose
List Price: $51.35
USRT Price: $43.65
Save $7.70!
52-240B - 1/8" 2 Edge Spiral Upcut Ball Nose
List Price: $51.35
USRT Price: $43.65
Save $7.70!
The polished flute allows for razor sharp cutting edge and easy chip evacuation.  The tool is available in an upcut spiral for improved chip evacuation. Designed for carving and modeling operations. The bit's improved tip geometry gives a superior cut compared to most ballnose endmills. Designed for carving and modeling operations. The bit's improved tip geometry gives a superior cut compared to most ballnose endmills.
3/16" 2 Edge Spiral Upcut Ball Nose 3/16" Super-O Flute Spiral Downcut 64-016  -  3/16" Super-O Flute Spiral Downcut
52-260B - 3/16" 2 Edge Spiral Upcut Ball Nose
List Price: $51.35
USRT Price: $43.65
Save $7.70!
64-018 - 3/16" Super-O Flute Spiral Downcut
List Price: $51.35
USRT Price: $43.65
Save $7.70!
64-016 - 3/16" Super-O Flute Spiral Downcut
List Price: $51.35
USRT Price: $43.65
Save $7.70!
Designed for carving and modeling operations. The bit's improved tip geometry gives a superior cut compared to most ballnose endmills. The polished flute allows for razor sharp cutting edge and easy chip evacuation.  The tool is available in a down cut spiral for improved part holding. The polished flute allows for razor sharp cutting edge and easy chip evacuation.  The tool is available in a down cut spiral for improved part holding.
64-024  -  1/4" Super-O Flute Spiral Downcut 63-832  -  5mm O-Flute Spiral Upcut 63-844  -  8mm O-Flute Spiral Upcut
64-024 - 1/4" Super-O Flute Spiral Downcut
List Price: $51.35
USRT Price: $43.65
Save $7.70!
63-832 - 5mm O-Flute Spiral Upcut
List Price: $51.70
USRT Price: $43.95
Save $7.75!
63-844 - 8mm O-Flute Spiral Upcut
List Price: $52.60
USRT Price: $44.71
Save $7.89!
The polished flute allows for razor sharp cutting edge and easy chip evacuation.  The tool is available in a down cut spiral for improved part holding. Designed to provide a smooth finish in hard plastics with upward chip removal. Designed to provide a smooth finish in hard plastics with upward chip removal.
65-018M  -  5mm  All Purpose O-Flute Spiral Upcut 52-703  -  1/8" Solid Carbide Two Flute Upcut 63-894  -  8mm O-Flute Spiral Upcut
65-018M - 5mm All Purpose O-Flute Spiral Upcut
List Price: $52.95
USRT Price: $45.01
Save $7.94!
52-703 - 1/8" Solid Carbide Two Flute Upcut
List Price: $53.35
USRT Price: $45.35
Save $8.00!
63-894 - 8mm O-Flute Spiral Upcut
List Price: $53.65
USRT Price: $45.60
Save $8.05!
The polished flute allows for razor sharp cutting edge and easy chip evacuation.  The tool is available in an upcut spiral for improved chip evacuation. 1/8" Solid Carbide Two Flute Upcut for Soft Plastics, Solid Surface, and Foam Designed to provide a smooth finish in soft plastics with upward chip removal.
1/4" 3 Edge Low Helix Finisher Upcut 60-242  -  1/4" 3 Edge Low Helix Finisher  -  Downcut 1/4" Super-O Flute Spiral Downcut
60-241 - 1/4" 3 Edge Low Helix Finisher Upcut
List Price: $54.45
USRT Price: $46.28
Save $8.17!
60-242 - 1/4" 3 Edge Low Helix Finisher - Downcut
List Price: $54.45
USRT Price: $46.28
Save $8.17!
64-025 - 1/4" Super-O Flute Spiral Downcut
List Price: $54.80
USRT Price: $46.58
Save $8.22!
Designed for perfect balance and ultra smooth finish over a wide speed range. Designed for perfect balance and ultra smooth finish over a wide speed range. The polished flute allows for razor sharp cutting edge and easy chip evacuation.  The tool is available in a down cut spiral for improved part holding.
63-846  -  8mm O-Flute Spiral Upcut 63-896  -  8mm O-Flute Spiral Upcut 52-300  -  5/16" 2 Edge Spiral Upcut
63-846 - 8mm O-Flute Spiral Upcut
List Price: $54.90
USRT Price: $46.67
Save $8.23!
63-896 - 8mm O-Flute Spiral Upcut
List Price: $54.90
USRT Price: $46.67
Save $8.23!
52-300 - 5/16" 2 Edge Spiral Upcut
List Price: $57.30
USRT Price: $48.71
Save $8.59!
Designed to provide a smooth finish in hard plastics with upward chip removal. Designed to provide a smooth finish in soft plastics with upward chip removal. Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired.
52-320  -  3/8" 2 Edge Spiral Upcut 1/4" All Purpose O-Flute Spiral Upcut 3/8" 2 Edge Spiral Upcut
52-320 - 3/8" 2 Edge Spiral Upcut
List Price: $57.30
USRT Price: $48.71
Save $8.59!
65-023 - 1/4" All Purpose O-Flute Spiral Upcut
List Price: $58.35
USRT Price: $49.60
Save $8.75!
52-120 - 3/8" 2 Edge Spiral Upcut
List Price: $58.50
USRT Price: $49.73
Save $8.77!
Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired. The polished flute allows for razor sharp cutting edge and easy chip evacuation.  The tool is available in an upcut spiral for improved chip evacuation. Designed as a general purpose spiral with several times the life of its high speed steel counterpart.  This bit should be used when upward chip flow is preferred.
3/8" 2 Edge Straight 52-100  -  5/16" 2 Edge Spiral Upcut   56-300  -  5/16" 2 Edge Straight
56-320 - 3/8" 2 Edge Straight
List Price: $58.50
USRT Price: $49.73
Save $8.77!
52-100 - 5/16" 2 Edge Spiral Upcut
List Price: $58.50
USRT Price: $49.73
Save $8.77!
56-300 - 5/16" 2 Edge Straight
List Price: $58.50
USRT Price: $49.73
Save $8.77!
Provides a superior finish in a variety of wood materials and optimum cutter life. Designed as a general purpose spiral with several times the life of its high speed steel counterpart.  This bit should be used when upward chip flow is preferred. Provides a superior finish in a variety of wood materials and optimum cutter life.
63-730  -  3/8" O-Flute Spiral Upcut 63-780  -  3/8" O-Flute Spiral Upcut 3/8" O-Flute Spiral Upcut
63-730 - 3/8" O-Flute Spiral Upcut
List Price: $58.55
USRT Price: $49.77
Save $8.78!
63-780 - 3/8" O-Flute Spiral Upcut
List Price: $58.55
USRT Price: $49.77
Save $8.78!
63-731 - 3/8" O-Flute Spiral Upcut
List Price: $59.15
USRT Price: $50.28
Save $8.87!
Designed to provide a smooth finish in hard plastics with upward chip removal. Designed to provide a smooth finish in soft plastics with upward chip removal. Designed to provide a smooth finish in hard plastics with upward chip removal.
1/8" 2 Edge Spiral Upcut 3/16" 2 Edge Spiral Upcut 52-250x2  -  5/32" 2 Edge Spiral Upcut 2 Pack ****Sold as 2 pack due to minimum order requirements from Onsrud****
Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired. Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired. Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired.
   
 
US Router Tools is the best source for all types of CNC and Router Tools needs like these Solid Surface bits for your Solid Surface bit applications.