|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/8" Solid Carbide Two Flute Upcut for Soft Plastics, Solid Surface, and Foam
|
Designed for pocketing applications where the bottom of the pocket must be smooth.
|
Designed as a general purpose spiral with several times the life of its high speed steel counterpart. This bit should be used when upward chip flow is preferred.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed as a general purpose spiral with several times the life of its high speed steel counterpart. This bit should be used when upward chip flow is preferred.
|
Designed as a general purpose spiral with several times the life of its high speed steel counterpart. This bit should be used when downward chip flow is preferred.
|
1/4" Solid Carbide Two Flute Upcut for Soft Plastics, Solid Surface, and Foam
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed as a general purpose spiral with several times the life of its high speed steel counterpart. This bit should be used when upward chip flow is preferred.
|
Designed as a general purpose spiral with several times the life of its high speed steel counterpart. This bit should be used when upward chip flow is preferred.
|
Designed as a general purpose spiral with several times the life of its high speed steel counterpart. This bit should be used when upward chip flow is preferred.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed as a general purpose spiral with several times the life of its high speed steel counterpart. This bit should be used when upward chip flow is preferred.
|
Designed as a general purpose spiral with several times the life of its high speed steel counterpart. This bit should be used when downward chip flow is preferred.
|
Designed as a general purpose spiral with several times the life of its high speed steel counterpart. This bit should be used when downward chip flow is preferred.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed as a general purpose spiral with several times the life of its high speed steel counterpart. This bit should be used when downward chip flow is preferred.
|
Designed for pocketing applications where the bottom of the pocket must be smooth.
|
Designed for pocketing applications where the bottom of the pocket must be smooth.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired.
|
Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired.
|
Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired.
|
Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired.
|
Designed for pocketing applications where the bottom of the pocket must be smooth.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for pocketing applications where the bottom of the pocket must be smooth.
|
Designed for pocketing applications where the bottom of the pocket must be smooth.
|
Designed for pocketing applications where the bottom of the pocket must be smooth.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed as a general purpose spiral with several times the life of its high speed steel counterpart. This bit should be used when upward chip flow is preferred.
|
Designed as a general purpose spiral with several times the life of its high speed steel counterpart. This bit should be used when downward chip flow is preferred.
|
Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for pocketing applications where the bottom of the pocket must be smooth.
|
Designed for pocketing applications where the bottom of the pocket must be smooth.
|
Designed for pocketing applications where the bottom of the pocket must be smooth.
|
|
|
