The IN-SAND™ CNC Sander is designed to use with any 4” Sanding disc (Not included) according with the finish needed.
Set Up at the CNC Machine.
- Check the tool Flexibility movement it should be about 3mm.
- Install the IN-SAND™ at the tool holder or Directly at the Spindle.
- You can measure the IN-SAND™ on the machine measuring device or simply update manually the tool length from pad surface, The diameter should be 4-11/32” (110mm) and not 3-15/16” (100mm) of the orbital movement of the pad.
- The sanding power is defined by the “Milling Depth” the max depth is 1/8” (3.17mm) but our recommendation is 8,000 RPM and milling depth of 0.3 – 0.5mm.
- Use the Option of “Milling Pockets” to control the tool path.
