Home > Specialty Tools > CNC Sanding Heads >

61299 - IN-SAND™ CNC Sander From Amana Tool
61299 IN-SAND CNC Sander From Amana Tool
 
Alternative Views:
List Price: $489.00
USRT Price: $445.00
Save $44.00!


Product Code: 61299
Qty:

Description
 
The IN-SAND™ CNC Sander is designed to use with any 4” Sanding disc (Not included) according with the finish needed.
  • Industrial quality
  • 3.50 orbit value

  • The Lower grit numbers, the more course the disc will be, and the higher the grit, the finer it will be.
  • 40 grit: Coarse
  • 80 grit: Medium
  • 100 grit: Medium
  • 120 grit: Fine
  • 220 grit: Fine
  • 440 grit: Extra Fine
  • Knowing which grit sandpaper to use depends on the type of job and what step in the process you are in.

Set Up at the CNC Machine.

  • Check the tool Flexibility movement it should be about 3mm.
  • Install the IN-SAND™ at the tool holder or Directly at the Spindle.
  • You can measure the IN-SAND™ on the machine measuring device or simply update manually the tool length from pad surface, The diameter should be 4-11/32” (110mm) and not 3-15/16” (100mm) of the orbital movement of the pad.
  • The sanding power is defined by the “Milling Depth” the max depth is 1/8” (3.17mm) but our recommendation is 8,000 RPM and milling depth of 0.3 – 0.5mm.
  • Use the Option of “Milling Pockets” to control the tool path.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Specialty Tools > CNC Sanding Heads


45704 - Carbide Tipped V Groove 90 Deg x 1/2 D x 1/2 CH x 1/4 Inch SHK Router Bit $32.29
SE13764 - 49/64" Screw-On Mortise Bit $22.57
25x6.5x1.1mm GENERAL P/RC-2375 $30.28
SEHB7016RH - 16mm Right-Hand Hinge Bit $20.00
17808 - BT40 - 60 deg. $21.60
S.C SPIRAL 1/16"x1/4" DOWN-CUT $45.24
04576 - ER11 Mini Collet Key for Adjustable Torque Wrench $37.80
SE2210 - 2" Roman Ogee Bit $58.13
4 PC 180x30x3MM HSS T-1/18% TG $45.20